姓名 罗亮

性别 男

学历 博士

电话 

邮箱 Liang_LUO@hfut.edu.cn

职称 助理研究员

专业 

职务

地址 

个人基本情况

2005.09 - 2009.07 武汉科技大学，机械学院，机械电子工程，学士

2009.09 - 2012.06 华中科技大学，机械学院，机械电子工程，硕士

2012.07 - 2017.05 伍伦贡大学（University of Wollongong），机械、材料及机电学院，先进制造，博士

2017.09 - 至今  合肥工业大学，汽车工程技术研究院，助理研究员

研究方向

先进制造

新能源汽车关键零部件

液压互联悬架

科研项目

[1] 企业横向课题，SYTECH增程式发动机苏格兰轭（Scotch Yoke）关键润滑技术研究，2019.5-2021.7，70万，在研，主持

[2] 企业横向课题，分接开关油室压力可靠释放技术与装置研究，2020/08-2022/09，100万，在研，参与

[3] 企业横向课题，新型高压分接开关技术与装置研究，2020/08-2022/09，100万，在研，参与

[4] 国家重点研发计划子课题，整车能量管理策略优化设计，2018YFB0105505-03，2018/05-2021/01，100万，结题，参与

发表论文

在《International Journal of Mechanical Sciences》、《Wear》、《Finite Elements in Analysis and Design》、《ASME》等期刊上录用或发表学术论文30多篇。代表性论文如下：

[1] L. Luo, N. Zhang, M. Zheng, J. Wu, B. Zhu, A Study of a New Bidirectional Pressure-Regulating Valve for Hydraulically Interconnected Suspension Systems, J. Pressure Vessel Technol. 143 (2021) 031701. https://doi.org/10.1115/1.4048323.

[2] L. Luo, Z. Jiang, D. Wei, F. Jia, A study of influence of hydraulic pressure on micro-hydromechanical deep drawing considering size effects and surface roughness, Wear. (2021) 203803. https://doi.org/10.1016/j.wear.2021.203803.

[3] L. Luo, J. Chang, J. Wu, B. Zhu, M. Zheng, N. Zhang, Design and Analysis of a Water-Cooling System in a New Yokeless and Segmented Armature Axial In-Wheel Motor for Electric Vehicles, Journal of Thermal Science and Engineering Applications. 13 (2021). https://doi.org/10.1115/1.4049750.

[4] L. Luo, D. Wei, G. Zu, Z. Jiang, Influence of blank holder-die gap on micro-deep drawing of SUS304 cups, International Journal of Mechanical Sciences. 191 (2021) 106065. https://doi.org/10.1016/j.ijmecsci.2020.106065.

[5] P. Liu, M. Zheng, D. Ning, L. Luo, N. Zhang, A Novel Controllable Electromagnetic Variable Inertance Device for Vehicle Vibration Reduction, in: S. Oberst, B. Halkon, J. Ji, T. Brown (Eds.), Vibration Engineering for a Sustainable Future, Springer International Publishing, Cham, 2021: pp. 103–109. https://doi.org/10.1007/978-3-030-47618-2_13.

[6] N. Zhang, T. Chen, M. Zheng, L. Luo, P. Liu, Real-time identification of vehicle body motion-modes based on motion-mode energy method, Mechanical Systems and Signal Processing. 143 (2020) 106843. https://doi.org/10.1016/j.ymssp.2020.106843.

[7] Y. Lu, G. Zu, L. Luo, Y. Wang, L. Gao, L. Yuan, X. Ran, X. Zhang, Investigation of microstructure and properties of strip-cast 4.5 wt% Si non-oriented electrical steel by different rolling processes, Journal of Magnetism and Magnetic Materials. 497 (2020) 165975. https://doi.org/10.1016/j.jmmm.2019.165975.

[8] J. Chang, Y. Fan, B. Zhu, L. Luo, J. Wu, Y. Pan, P. Kang, Design of a new type yokeless and segmented armature axial flux machine, International Journal of Applied Electromagnetics and Mechanics. 62 (2020) 823–834. https://doi.org/10.3233/JAE-190085.

[9] D. Ning, S. Sun, H. Du, W. Li, N. Zhang, M. Zheng, L. Luo, An electromagnetic variable inertance device for seat suspension vibration control, Mechanical Systems and Signal Processing. 133 (2019) 106259. https://doi.org/10.1016/j.ymssp.2019.106259.

[10] Z. Yan, D. Yin, L. Luo, G. He, Z. Dai, Integrated product and process development of powder metallurgy hub for automotive clutch, Powder Metallurgy. 62 (2019) 247–257. https://doi.org/10.1080/00325899.2019.1639917.

[11] J. Wu, L. Luo, B. Zhu, N. Zhang, M. Xie, Dynamic computation for rigid–flexible multibody systems with hybrid uncertainty of randomness and interval, Multibody Syst Dyn. (2019). https://doi.org/10.1007/s11044-019-09677-1.

[12] H. Wu, J. Zhao, L. Luo, S. Huang, L. Wang, S. Zhang, S. Jiao, H. Huang, Z. Jiang, Performance Evaluation and Lubrication Mechanism of Water-Based Nanolubricants Containing Nano-TiO2 in Hot Steel Rolling, Lubricants. 6 (2018) 57. https://doi.org/10.3390/lubricants6030057.

[13] L. Luo, Z. Jiang, D. Wei, X. Wang, C. Zhou, Q. Huang, Micro-hydromechanical deep drawing of metal cups with hydraulic pressure effects, Front. Mech. Eng. 13 (2018) 66–73. https://doi.org/10.1007/s11465-018-0468-z.

[14] L. Luo, D. Wei, X. Wang, C. Zhou, Q. Huang, J. Xu, D. Wu, Z. Jiang, Effects of hydraulic pressure on wrinkling and earing in micro hydro deep drawing of SUS304 circular cups, Int J Adv Manuf Technol. 90 (2017) 189–197. https://doi.org/10.1007/s00170-016-9380-z.

[15] L. Luo, Z. Jiang, D. Wei, Influences of micro-friction on surface finish in micro deep drawing of SUS304 cups, Wear. 374–375 (2017) 36–45. https://doi.org/10.1016/j.wear.2016.11.043.

[16] D. Wei, L. Luo, H. Sato, Z. Jiang, K. Manabe, Simulations of hydro-mechanical deep drawing using Voronoi model and real microstructure model, Procedia Engineering. 207 (2017) 1033–1038. https://doi.org/10.1016/j.proeng.2017.10.1126.

[17] L. Luo, D. Wei, Z. Jiang, C. Zhou, Q. Huang, Z. Huang, Study of micro hydromechanical deep drawing of SUS304 circular cups by an ALE model, Procedia Engineering. 207 (2017) 1039–1044. https://doi.org/10.1016/j.proeng.2017.10.1127.

[18] F. Jia, J. Zhao, L. Luo, H. Xie, Z. Jiang, Experimental and numerical study on micro deep drawing with aluminium-copper composite material, Procedia Engineering. 207 (2017) 1051–1056. https://doi.org/10.1016/j.proeng.2017.10.1129.

[19] L. Luo, Z.Y. Jiang, D.B. Wei, H. Sato, T. Furushima, K. Manabe, Effects of Hydraulic Pressure on Shape Accuracy of Drawn Circular Cups during Micro Hydro Deep Drawing, Materials Science Forum. 879 (2017) 2274–2279. https://doi.org/10.4028/www.scientific.net/MSF.879.2274.

[20] L. Luo, H. Xie, D. Wei, X. Wang, C. Zhou, Z. Jiang, A new micro scale FE model of crystalline materials in micro forming process, MATEC Web of Conferences. 80 (2016) 02002-1-02002–8. https://doi.org/10.1051/matecconf/20168002002.

[21] L. Luo, Z.Y. Jiang, D.B. Wei, H. Sato, T. Furushima, K. Manabe, A Numerical Study of Micro Hydro Deep Drawing of SUS304 Sheets, Applied Mechanics and Materials. 846 (2016) 524–529. https://doi.org/10.4028/www.scientific.net/AMM.846.524.

[22] L. Luo, Z. Jiang, D. Wei, K. Manabe, X. Zhao, D. Wu, T. Furushima, Effects of surface roughness on micro deep drawing of circular cups with consideration of size effects, Finite Elements in Analysis and Design. 111 (2016) 46–55. https://doi.org/10.1016/j.finel.2015.11.005.

[23] L. Luo, Z. Jiang, D. Wei, K. Manabe, H. Sato, Experimental and numerical study of micro deep drawing, MATEC Web of Conferences. 21 (2015) 09003. https://doi.org/10.1051/matecconf/20152109003.

[24] L. Luo, Z. Jiang, D. Wei, K.-I. Manabe, H. Sato, X. He, P. Li, An experimental and numerical study of micro deep drawing of SUS304 circular cups, Manufacturing Review. 2 (2015) 27. https://doi.org/10.1051/mfreview/2015029.

[25] Y. Zhao, L. Luo, Z.Y. Jiang, X.M. Zhao, D. Wu, Study on Simulation and Experiment of Micro Sheet Metal Forming, Advanced Materials Research. 941–944 (2014) 1876–1881. https://doi.org/10.4028/www.scientific.net/AMR.941-944.1876.

[26] L. Luo, Z. Jiang, D. Wei, X. He, Study on Micro Hydroforming of Metals, Advanced Materials Research. 887–888 (2014) 1133–1138. https://doi.org/10.4028/www.scientific.net/AMR.887-888.1133.

[27] L. Luo, Z.Y. Jiang, D.B. Wei, X.F. He, Surface Modification of Titanium and its Alloys for Biomedical Application, Advanced Materials Research. 887–888 (2014) 1115–1120. https://doi.org/10.4028/www.scientific.net/AMR.887-888.1115.

[28] L. Luo, X. He, B. Den, X. Huang, Theoretical and Experimental Research on a Pressure-Reducing Valve for a Water Hydraulic Vane Pump, J. Pressure Vessel Technol. 136 (2014) 021601-021601–5. https://doi.org/10.1115/1.4025686.

[29] L. Luo, Z. Jiang, H. Lu, D. Wei, K. Linghu, X. Zhao, D. Wu, Optimisation of Size-controllable Centroidal Voronoi Tessellation for FEM Simulation of Micro Forming Processes, Procedia Engineering. 81 (2014) 2409–2414. https://doi.org/10.1016/j.proeng.2014.10.342.

[30] X. He, L. Luo, B. Zhu, Optimization of the Silencing Grooves on the Port Plate of a Vane-Type Water Hydraulic Pump, Advanced Science Letters. 15 (2012) 430–432. https://doi.org/10.1166/asl.2012.4201.

[31] X. He, W. Huang, B. Zhu, L. Luo, Air Suction Characteristics of a Water Hydraulic Piston Pump With Check Valves, Journal of Fluids Engineering. 133 (2011) 114502.

获奖情况

JASSO (Japan Student Services Organization) Short-term Exchange Award （2015）

学术兼职

Metals，Materials，Insight-Mechanical Engineering编委